Hitachi SJ Series, Руководство пользователя

Страница: 102 / 786

9.3
9.3.1
・
・
・
・
Scroll menu
Chapter 9
9.3 Set up parameters!
9.3.1 Checking the List and Configuring
"Scroll Mode"
・
I want to first configure settings to rotate the motor.
・
To configure
parameters.
・
I want to check parameter settings all at once.
・
Press F1 (Menu) key on the screen that is
displayed upon power
example below) to move to the system settings
screen (M01).
Scroll menu -
Set-up procedure
Q
▼
Menu
Output Frequency
Output current
Input terminal monitor
STOP
Back
Scroll menu
All parameters
d: Monitor
F: Command monitor/setting
A: Operation function
b: Protective function
STOP
Back
Scroll menu
F: Command monitor/setting
A: Operation function
b: Protective function
C: Terminal, RS485
H: Motor control
STOP
Chapter 9
Set up parameters!
Checking the List and Configuring
"Scroll Mode"
I want to first configure settings to rotate the motor.
To configure inverter settings, I want to change
parameters.
I want to check parameter settings all at once.
Press F1 (Menu) key on the screen that is
displayed upon power-
example below) to move to the system settings
screen (M01).
- Parameter selection screen
up procedure
Menu
oFW
Output Frequency
Output current
Input terminal monitor
STOP
Back oFW
Scroll menu
All parameters
d: Monitor
F: Command monitor/setting
A: Operation function
b: Protective function
STOP
Back oFW
Scroll menu
F: Command monitor/setting
A: Operation function
b: Protective function
C: Terminal, RS485
H: Motor control
STOP
Set up parameters!
Checking the List and Configuring
I want to first configure settings to rotate the motor.
inverter settings, I want to change
I want to check parameter settings all at once.
Press F1 (Menu) key on the screen that is
-on (Multi-monitor in the
example below) to move to the system settings
Parameter selection screen
46.49Hz
M1
Output Frequency
29.51 Hz
Output current
Input terminal monitor
LLLLLLLLLLL
0.00Hz
M1
All parameters
F: Command monitor/setting
A: Operation function
b: Protective function
0.00Hz
M1
F: Command monitor/setting
A: Operation function
b: Protective function
C: Terminal, RS485
H: Motor control
Checking the List and Configuring
I want to first configure settings to rotate the motor.
inverter settings, I want to change
I want to check parameter settings all at once.
Press F1 (Menu) key on the screen that is
monitor in the
example below) to move to the system settings
Parameter selection screen
Optional
device
M1
H01
29.51 Hz
11.9 A
LLLLLLLLLLL
----
L01
F: Command monitor/setting
----
L01
F: Command monitor/setting
9-7
I want to first configure settings to rotate the motor.
inverter settings, I want to change
example below) to move to the system settings
・
When configuring basic settings of motor, base
frequency, rated voltage of motor, input and output
of terminals, as well as when
functions, change parameters in the scroll mode.
・
You can check list of setting data of parameters in
the scroll mode, therefore, it is also useful when
checking the settings.
・
In the system settings,
the initial screen, dA
d: Monitor are initially displayed.
Action
3.1 Choose the scroll mode on the system settings
screen (M01) and press the
the scroll menu (L01). To 3.2.
3.2 Choose a group you want to browse using the up
and down (
key
example, select "H: Motor control".
Example:
A
Menu
STOP
When configuring basic settings of motor, base
frequency, rated voltage of motor, input and output
of terminals, as well as when
functions, change parameters in the scroll mode.
You can check list of setting data of parameters in
the scroll mode, therefore, it is also useful when
checking the settings.
In the system settings,
he initial screen, dA
d: Monitor are initially displayed.
Action
Choose the scroll mode on the system settings
screen (M01) and press the
the scroll menu (L01). To 3.2.
Choose a group you want to browse using the up
and down (
key to move to the parameter list display.
example, select "H: Motor control".
Example: In the example shown below, the Hb
which is a basic parameter of induction
motor, is checked, and a parameter is
changed. To 3.3.
A
Menu
oFW
Menu
01 Scroll mode
02 R/W function
03 System settings
STOP
Operating Instructions
When configuring basic settings of motor, base
frequency, rated voltage of motor, input and output
of terminals, as well as when
functions, change parameters in the scroll mode.
You can check list of setting data of parameters in
the scroll mode, therefore, it is also useful when
checking the settings.
In the system settings, if the scroll screen is set to
he initial screen, dA-01, dA
d: Monitor are initially displayed.
Choose the scroll mode on the system settings
screen (M01) and press the
the scroll menu (L01). To 3.2.
Choose a group you want to browse using the up
) keys, and then press the SEL(O)
to move to the parameter list display.
example, select "H: Motor control".
In the example shown below, the Hb
which is a basic parameter of induction
motor, is checked, and a parameter is
changed. To 3.3.
0.00Hz
oFW
M1
01 Scroll mode
02 R/W function
03 System settings
Operating Instructions
When configuring basic settings of motor, base
frequency, rated voltage of motor, input and output
of terminals, as well as when configuring individual
functions, change parameters in the scroll mode.
You can check list of setting data of parameters in
the scroll mode, therefore, it is also useful when
if the scroll screen is set to
01, dA-02, and dA
d: Monitor are initially displayed.
Choose the scroll mode on the system settings
screen (M01) and press the SEL(O) key to show
the scroll menu (L01). To 3.2.
Choose a group you want to browse using the up
and then press the SEL(O)
to move to the parameter list display.
example, select "H: Motor control".
In the example shown below, the Hb
which is a basic parameter of induction
motor, is checked, and a parameter is
Optional
device
M1
M01
Operating Instructions
When configuring basic settings of motor, base
frequency, rated voltage of motor, input and output
configuring individual
functions, change parameters in the scroll mode.
You can check list of setting data of parameters in
the scroll mode, therefore, it is also useful when
if the scroll screen is set to
02, and dA-03 of the
Choose the scroll mode on the system settings
SEL(O) key to show
Choose a group you want to browse using the up
and then press the SEL(O)
to move to the parameter list display. For
In the example shown below, the Hb group,
which is a basic parameter of induction
motor, is checked, and a parameter is
Optional
device
M01
Operating Instructions
frequency, rated voltage of motor, input and output
configuring individual
You can check list of setting data of parameters in
if the scroll screen is set to
Choose a group you want to browse using the up
and then press the SEL(O)
group,