Hitachi SJ Series, Руководство пользователя

Страница: 137 / 786

Chapter 10
10.2 Let’s Check the Procedures
•
•
•
6.
1.
Chapter 10
10.2 Let’s Check the Procedures
Before Test Runs !
• Want to check the procedure for test runs.
• Want to check the operation
this unit and
and motor have not been connected yet.
• Want to confirm
error condition, via making error conditions
Q
▼
Procedure
2. Checking the inverter
3. Installation of the
inverter
4. Wiring requirements
5. Setting up th
operation method
6. Setting up the
running method
7. Selecting a control
mode and protective
function according to
a load
1. Safety check
Chapter 10
10.2 Let’s Check the Procedures
Before Test Runs !
Want to check the procedure for test runs.
check the operation
and the host device even though a load
and motor have not been connected yet.
confirm how the system behaves
condition, via making error conditions
Procedure
▶
Checking the inverter
Installation of the
Wiring requirements
Setting up the
operation method
Setting up the
running method
Selecting a control
mode and protective
function according to
Safety check
10.2 Let’s Check the Procedures
Before Test Runs !
Want to check the procedure for test runs.
check the operation perform
the host device even though a load
and motor have not been connected yet.
how the system behaves
condition, via making error conditions
• Confirm that there is no abnormality in
items included in the package of inverter
and the Checking the inverter
• Confirm that the inverter is installed in a
proper environment and in a proper
setting.
• Confirm that wires are properly
connected to the inverter.
• Check how to operate the operator
keypad.
• Set up the inverter running method.
• Set up the inverter control method.
mode and protective
function according to
• See the precautions
the inverter.
10.2 Let’s Check the Procedures
Want to check the procedure for test runs.
performance between
the host device even though a load
and motor have not been connected yet.
how the system behaves in an
condition, via making error conditions.
Check Items
Confirm that there is no abnormality in
items included in the package of inverter
and the appearance of the inverter.
Confirm that the inverter is installed in a
proper environment and in a proper
.
Confirm that wires are properly
connected to the inverter.
Check how to operate the operator
keypad.
Set up the inverter running method.
Set up the inverter control method.
Completed
See the precautions
the inverter.
10-2
ance between
the host device even though a load
an
• To perform a test run, follow the procedures shown
below.
• Carefully read and understand “Chapter 1 Safety
Instructions” and the relevant instructions in the
following chart before starting works.
A
Check Items
▶
Confirm that there is no abnormality in
items included in the package of inverter
appearance of the inverter.
Confirm that the inverter is installed in a
proper environment and in a proper
Confirm that wires are properly
connected to the inverter.
Check how to operate the operator
Set up the inverter running method.
Set up the inverter control method.
Completed
See the precautions required for handling
To perform a test run, follow the procedures shown
below.
Carefully read and understand “Chapter 1 Safety
Instructions” and the relevant instructions in the
following chart before starting works.
A
Confirm that there is no abnormality in
items included in the package of inverter
appearance of the inverter.
Confirm that the inverter is installed in a
proper environment and in a proper
Confirm that wires are properly
Check how to operate the operator
Set up the inverter running method.
•
Set up the inverter control method.
required for handling •
To perform a test run, follow the procedures shown
Carefully read and understand “Chapter 1 Safety
Instructions” and the relevant instructions in the
following chart before starting works.
For more details,
• See “Chapter 5 Included Items”.
• See “Chapter 6 Installation”.
• See “Chapter 7 Wire Connection
and Optional Devices”.
• See “Chapter 9 Operating
Instructions”.
• See “Chapter 11 Examples of
Settings by Operation Command
Destination”.
• See the Chapter 12 for
descriptions of required items.
The items required for running the
inverter are provided in the
following article.
• See Chapter 1 Safety
Instructions/Risks.
To perform a test run, follow the procedures shown
Carefully read and understand “Chapter 1 Safety
Instructions” and the relevant instructions in the
following chart before starting works.
For more details,
See “Chapter 5 Included Items”.
See “Chapter 6 Installation”.
See “Chapter 7 Wire Connection
and Optional Devices”.
See “Chapter 9 Operating
Instructions”.
See “Chapter 11 Examples of
Settings by Operation Command
Destination”.
See the Chapter 12 for
descriptions of required items.
The items required for running the
inverter are provided in the
following article.
See Chapter 1 Safety
Instructions/Risks.
Test Run
To perform a test run, follow the procedures shown
Carefully read and understand “Chapter 1 Safety
Instructions” and the relevant instructions in the
For more details,
See “Chapter 5 Included Items”.
See “Chapter 6 Installation”.
See “Chapter 7 Wire Connection
and Optional Devices”.
See “Chapter 9 Operating
See “Chapter 11 Examples of
Settings by Operation Command
See the Chapter 12 for
descriptions of required items.
The items required for running the
inverter are provided in the
Run
To perform a test run, follow the procedures shown
The items required for running the