Hitachi RCI-1.0FSR, Руководство по обслуживанию

Страница: 262 / 314

7 Servicing
RPK-FSR(H)M - Wall mounted
SMGB0137 rev.0 - 05/2021 252
7.7.8 Removing drain pan
Take care when removing the drain pan, as water may have collected in the drain pan.
Do not remove the horizontal louver. Otherwise, some component may be damaged.
?
N O T E
Before removing the drain pan, check that the drain hose is not fixed. If the drain hose is firmly fixed, the drain pan cannot be removed.
1 Remove the front panel according to the
“7.7.2 Removal of the front panel”
chapter.
2 Remove the electrical box according to the “7.7.7 Removing AS motor” chapter.
3 Release the catches fixing the drain pan.
-
0.4HP to 1.0HP (3 positions): (A)×1, (B)×1 and (C)×1
-
1.5HP to 4.0HP (4 positions): (A)×2, (B)×1 and (C)×1
Then draw the drain pan in the direction of the arrow in the figure below to remove it.
4 When mounting the drain pan, mount it in the reverse procedure. Make sure that the catches fixing the drain pan,
mentioned in the procedure (3), are fastened.
Fixing
catch
(C)
Fixing
catch (B)
Fixing
catch (A)
Positions of fixing catches for drain pan
(Example: 1.5HP)
Direction for removing drain pan
2. Pull the drain pan frontward
and downward
1. Draw the drain pan
frontward
(A)
(B) (C)
Center pole
of drain pan
Pull the drain
pan frontward
Fixing catch
for drain pan
Fixing catch for drain pan
Release the catch in the direction
of the arrow
Release the catch in the direction
of the arrow
Fixing catch
for drain pan