Hitachi HF-W2000, Инструкция по эксплуатации

Страница: 88 / 325

2. OPERATION
2-16
 Action to take if the link is unstable at 1000 Mbps
Depending on the type of the connected hub, the link may not be stable at 1000 Mbps. If
you want to use the network at 1000 Mbps, verify the connection with the hub in advance.
If the link is unstable at 1000 Mbps, it is made stable by taking the following action.
• Use a cable which is 20 to 100 meters long (UTP Category 5e or better).
• Fix the master/slave mode setting to Master (valid only in the 1000Mbps setting).
Follow the procedure below to fix the mater/slave mode to Master. The link may not
function depending on the type of the hub. In this case, re-set the setting to
Auto Detect
.
1. Execute steps 1 though 5 in “

Setting the network transfer speed” in “2.8 Setting Up the
LAN Interface”.
2. Click the
Advanced
tab. Select
Gigabit Master/Slave Mode
from the
Settings
list.
3. From the
Value
pull-down menu, select
Force Master Mode
.
4. Click
OK
and restart the equipment.