manualshive.com logo in svg

Hitachi HD6417032, Руководство по оборудованию

"Hitachi HD6417032 - процессор с быстрым вычислительным ядром RISC, отлично подходит для встраиваемых систем. Пользователи могут бесплатно загрузить руководство по аппаратному обеспечению на manualshive.com. Этот manual поможет вам полностью изучить функционал и возможности данного продукта."

Поделиться
Скачать
background image

76

5.4

Interrupt Operation

5.4.1

Interrupt Sequence

The sequence of interrupt operations is described below. Figure 5.2 shows a flowchart of the
operations up to acceptance of the interrupt.

1. The interrupt request sources send interrupt request signals to the interrupt controller.

2. The interrupt controller selects the highest-priority interrupt among the interrupt requests sent,

following the priority order indicated in table 5.3 and the levels set in interrupt priority
registers A–E (IPRA–IPRE). Lower priority interrupts are ignored*. If two interrupts with the
same priority level are requested simultaneously, or if there are multiple interrupts occurring
within a single module, the interrupt with the highest default priority or priority within module
as indicated in table 5.3 is selected.

3. The interrupt controller compares the priority level of the selected interrupt request with the

interrupt mask level bits (I3–I0) in the CPU’s status register (SR). If the request priority level
is equal to or less than the interrupt mask level, the request is ignored. If the request priority
level is higher than the interrupt mask level, the interrupt controller accepts the request and
sends an interrupt request signal to the CPU.

4. When the interrupt controller accepts an interrupt request, it drives 

IRQOUT

 pin low.

5. The CPU detects the interrupt request sent from the interrupt controller when it decodes the

next instruction to be executed. Instead of executing that instruction, the CPU starts interrupt
exception handling. (See figure 5.4.)

6. In interrupt exception handling, first SR and PC are pushed onto the stack.

7. The priority level of the accepted interrupt is copied to the interrupt mask level bits (I3–I0) in

the status register (SR).

8. When the accepted interrupt is level-sensed or from an on-chip supporting module, the

IRQOUT

 pin returns to the high level. If the accepted interrupt is edge-sensed, the 

IRQOUT

pin returns to the high level when the instruction to be executed by the CPU in (5) is replaced
by the interrupt exception handling. If the interrupt controller has accepted another interrupt
(of a level higher than the current interrupt), however, the 

IRQOUT

 pin remains low.

9. The CPU accesses the exception vector table at the entry for the vector number of the accepted

interrupt, reads the start address of the exception handling routine, branches to that address,
and starts executing the program there. This branch is not delayed.

Note: * A request for an external interrupt (IRQ) designated as edge-detected is held pending once

only.  An external interrupt designated as level-detected is held pending as long as the
interrupt request continues, but if the request is cleared before the CPU next accepts an
interrupt, the interrupt request is regarded as not having been made.
Interrupt requests from on-chip supporting modules are level requests.  When the status
flag in a particular module is set, an interrupt is requested.  For details, see the descriptions
of the individual modules.  Note that the interrupt request will be continued unless an
operation described in "Clearing Conditions" is performed.

Содержание HD6417032



















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HD6417032

Yamaha EMP100 Supplementary Manual preview
EMP100
Бренд: Yamaha Страницы: 4
Quantum Scalar 50 Upgrade Instructions preview
Scalar 50
Бренд: Quantum Страницы: 20
Dialogic EDP-10 Quick Install Manual preview
EDP-10
Бренд: Dialogic Страницы: 2
Daedalon EC-33 Instruction Manual preview
EC-33
Бренд: Daedalon Страницы: 6
ZALMAN CNPS7000A Series User Manual preview
CNPS7000A Series
Бренд: ZALMAN Страницы: 9
IndigoVision Compact NVR-AS 4000 User Manual preview
Compact NVR-AS 4000
Бренд: IndigoVision Страницы: 38
Renesas H8SX1664 User Manual preview
H8SX1664
Бренд: Renesas Страницы: 21
Harman Lexicon MPX 200 User Manual preview
Lexicon MPX 200
Бренд: Harman Страницы: 77
Nexus OSL101 Instructions Manual preview
OSL101
Бренд: Nexus Страницы: 9
ekwb EK-FC 780 GTX Lightning Installation And Mounting Manual preview
EK-FC 780 GTX Lightning
Бренд: ekwb Страницы: 3
Renesas Emulation Probe M306V8T-EPB User Manual preview
Emulation Probe M306V8T-EPB
Бренд: Renesas Страницы: 90
OWC MINISTACK STX User Manual preview
MINISTACK STX
Бренд: OWC Страницы: 8
Extron electronics EDID 101D User Manual preview
EDID 101D
Бренд: Extron electronics Страницы: 20
FOR-A MFR-16SDI Installation Manual preview
MFR-16SDI
Бренд: FOR-A Страницы: 2
Silicon Laboratories SiM3L1xx User Manual preview
SiM3L1xx
Бренд: Silicon Laboratories Страницы: 91
AVYCON AVK-HN41V4-1T-NVR Quick Start Manual preview
AVK-HN41V4-1T-NVR
Бренд: AVYCON Страницы: 2
Xilinx ML510 Overview And Setup preview
ML510
Бренд: Xilinx Страницы: 76
Star Lake SK221 User Manual preview
SK221
Бренд: Star Lake Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды