Desktop power module
OSL101 instructions
continued...
above-desk
│
below-desk
│
beyond-desk
Safety warning
For your safety, this product must be installed in
accordance with local Building Regulations.
If in
any doubt, or where required by the law, consult
a competent person who is registered with an
electrical self-certification scheme. Wiring should
be in accordance with the latest edition of the IET
regulations (BS 7671) . If the unit is being installed
in an office environment by means of a 13A plug
please ensure BS6396 is adhered to.
Please read carefully and use in accordance
with these safety wiring instructions. Before
commencing any electrical work ensure the supply
is switched off at the mains. To prevent fire hazard
always use cable of the correct rating & type for the
application.
Warning do not exceed the load rating of this
device as stated on the rear of the product.
Built in protection
This product has been designed to protect
connected equipment as well as end user. Each
socket outlet has protection in the form of a 3A
resettable thermal fuse that detects overloads or
any defective equipment that may be connected.
