manualshive.com logo in svg

Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 58 / 392

Поделиться
Скачать
Hioki Memory HiCorder MR6000 Скачать руководство пользователя страница 58

52

Overlaying New Waveforms With Previously Acquired Waveforms

3.1  Overlaying New Waveforms With Previously 

Acquired Waveforms

New waveforms can be overlaid with the presently displayed waveforms.

 • You can compare the new waveforms with those recorded before. (When 

[Mode]

 is set to 

[Repeat]

) (p. 6)

 • Two methods are available to overlay waveforms: the automatic overlaying during measurement 

and the manual overlaying.

 

> [Status] > [Condition]

1

1 

Tap the 

[Overlay]

 box, and then choose an overlaying method from the list.

Off

Does not overlay the waveforms.

Auto

Overlays waveforms newly acquired with the presently displayed waveforms every 

time the instrument acquires new ones.

When 

[Mode]

 is set to 

[Repeat]

, the instrument overlays the new waveforms with 

the presently displayed waveforms beginning from the start until the stop of the 

measurement.

Manual

Manually overlays the new waveforms with the presently displayed waveforms.

See step 

3

 “Overlay the waveforms manually (leaving any waveforms to be displayed 

on the screen).” (p. 53).

See “When the overlay function is enabled (When 

[Overlay]

 is set to 

[Auto]

 or 

[Manual]

)” (p. 53).

HIOKI MR6000A966-03

Содержание Memory HiCorder MR6000









































































































































































































































































































































































































Отзывы:

Нет отзывов