Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 356 / 392

350
External Input and Output
3
Tap the [OUT1] and [OUT2] boxes in the [External out] area in turn, and then from the list,
choose a signal output action.
Choose a condition under which the instrument outputs a signal.
Judge(Pass) Outputs a low-level signal when a pass judgment is given for the numerical
calculation result.
Judge(Fail)
Outputs a low-level signal when a fail judgment is given for the numerical calculation
result.
Error Outputs a low-level signal when some kind of error or warning occurs.
Busy
Outputs a low-level signal while rejecting a START signal because the instrument is
in the busy state such as performing a measurement and saving data.
[Waiting for Trigger] Outputs a low-level signal while waiting for a trigger.
The instrument continues outputting the signal for a pass/fail judgment (low-level output) until it starts the next
measurement.
The instrument can output various signals depending on its state.
Output signal Open-drain output (with voltage output), active low
Output voltage
range
High level: 4.0 V to 5.0 V
Low level: 0 V to 0.5 V
Maximum input
voltage
50 V DC, 50 mA, 200 mW
GND
OUT1
OUT2
100 kΩ
10 kΩ
5 V
High
4.0 V to 5.0 V
Low
0 V to 0.5 V
Output period
HIOKI MR6000A966-03