Hioki Memory HiCorder MR6000 Скачать руководство пользователя страница 348

Страница: 348 / 392

342

Sending Email messages

Configuring the email contents settings

1
2
3
4

Tap

[Body]

Tap the

[Title]

box, and then enter a mail title.

Tap the

[Body]

box, and then enter an email body.

Tap the

[Maximum attachment size]

button, and then enter the maximum attachment size.



2048

Specify the maximum file size so that no large-size data is sent to the mail server. If a measured data size

automatically saved is larger than the specified size, the instrument does not send email messages.

•

Data with the specified file size or less may also not be sent due to server restrictions.

•

Data is converted (encoded by Base64, compressed, encrypted) for attachment; however, the maximum

file size is determined in terms of the size before conversion. Thus, the actually sent data may be larger

(approximately 1.3 times) than the size limitation.

HIOKI MR6000A966-03

Содержание Memory HiCorder MR6000









































































































































































































































































































































































































Результаты поиска

Содержание Memory HiCorder MR6000

Отзывы:

Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 348 / 392

Результаты поиска

Содержание Memory HiCorder MR6000

Отзывы: