Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 297 / 392

291
Configuring the CAN/LIN Definition Data Settings
12.4 Configuring the CAN/LIN Definition Data
Settings
This chapter describes how to set definition data for displaying CAN/LIN signals as waveforms. In
CAN measurement mode, loading a DBC file or a CDF file can choose CAN definition data. In LIN
measurement mode, loading a LDF file, which stands for LIN description file, can choose LIN definition
data.
> [Channel] > [UNIT] > [CAN/LIN] > [Signal setting]
1 2 3 4 5 6 7 8
11 12 13
141516 9
10
No. Name Function
1
Signal
Allows you to enter a signal name for the data concerned.
Number of characters that can be entered: up to 32
2
ID Allows you to enter a message ID, in hexadecimal notation (p. 297), of a
message that includes data you wish to allocate to a channel.
Both 11-bit base IDs and 29-bit extended IDs are supported.
0 to 1FFFFFFF
3
Start bit Allows you to enter the data starting address on the message frame.
Specify the least significant bit (LSB) of a signal you wish to capture.
0  to 63
See “To find out the data starting address ([Start bit])” (p. 295).
4
Bit length Allows you to enter the data size, in bits, of a signal you wish to capture.
1 to 64 , default setting: 8 
CAN/LIN Measurement Function
HIOKI MR6000A966-03