Hioki Memory HiCorder MR6000 Скачать руководство пользователя страница 282

Страница: 282 / 392

276

Files

Freely choosing data items to be saved and save files (SAVE key)

You can save waveform data by pressing the

SAVE

key.

See “Freely choosing data items to be saved and save files (SAVE key)” (p. 109).

Press the

SAVE

key.

The

[Manual save]

dialog box is displayed.

Tap the

[Save Block]

box, and then from the list, choose a block in which data is saved.

Display Block



Saves waveforms included in displayed blocks.

All Block

Saves waveforms included in the specified number of blocks being used counting from

the start block.

Tap

[Execute]

Waveforms included in displayed blocks are saved.

Loading waveform data

You can load files saved in recording media onto the instrument.

See “Loading Data” (p. 113).

Extension

Measurement target

R_M

Loads trend waveforms and instantaneous waveforms included in all blocks to restore

the waveforms to those measured with the dual sampling set to

[On]

REC

Loads trend waveforms only. The dual sampling setting is set to

[Off]

MEM

Loads instantaneous waveforms included in only one block. The dual sampling is set

[Off]

HIOKI MR6000A966-03

Содержание Memory HiCorder MR6000









































































































































































































































































































































































































Результаты поиска

Содержание Memory HiCorder MR6000

Отзывы:

Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 282 / 392

Результаты поиска

Содержание Memory HiCorder MR6000

Отзывы: