Hioki Memory HiCorder MR6000 Скачать руководство пользователя страница 161

Страница: 161 / 392

155

Searching For Positions Where a Trigger Condition Is Satisfied

Change retrieved positions using the

[Search Pos.]

switching panel to check search results.

You can change retrieved positions by tapping

[<]

[>]

The display order follows the setting in

[Display order]

[Trace cursor]

Set to

[On]

to move the cursor to the retrieved positions.

[Event mark]

Set to

[On]

to place event marks to the retrieved positions.

Tapping

[Next]

executes another search beginning from the next point of the retrieved position presently

displayed. The previous search result is discarded.

To jump to a specified retrieved position

As described in “6.4 Jumping to the Specified Position” (p. 159), choose

[Search number]

in the

[Type]

box,

and then tap

[Execute]

Search Function

HIOKI MR6000A966-03

Содержание Memory HiCorder MR6000









































































































































































































































































































































































































Результаты поиска

Содержание Memory HiCorder MR6000

Отзывы:

Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 161 / 392

Результаты поиска

Содержание Memory HiCorder MR6000

Отзывы: