Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 165 / 392

159
Jumping to the Specified Position
6.4 Jumping to the Specified Position
You can jump to the specified time, trace cursor position, section cursor position, event number,
trigger point, or search mark.
>
1
2
3
1
In the [Method] area, tap [Jump] to set the search method to the jump method.
2
Tap the [Type] box, and then from the list, choose a type to jump to.
Event mark  Allows you to enter an event number to jump to in the [Event mark number] box.
Cursor Allows you to choose a position, at which a trace cursor or section cursor is specified,
to jump to.
Time Time Allows you to enter an absolute time to jump to when ( [System]
> [Env.] >) [Time value display] is set to [Date] .
Time from trigger
point
Allows you to enter a time relative to the trigger point to jump to
when ( [System] > [Env.] >) [Time value display] is set to [Time]
or
[Mod 60]
.
Points Allows you to enter the number of points to jump to in the [Points]
box when measurement is performed using the external sampling
or when ( [System] > [Env.] >) [Time value display] is set to
[Samples] .
Trigger
Jumps to the start or stop trigger point.
Search number Allows you to enter a search number to jump to in the [Search number] box.
Search Function
HIOKI MR6000A966-03