manualshive.com logo in svg

Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 155 / 392

Поделиться
Скачать
Hioki Memory HiCorder MR6000 Скачать руководство пользователя страница 155

149

Searching For Peak Values

6 

Tap the 

[Type]

 box, and then from the list, choose a value type to be searched for.

Maximum

Allows you to search for the maximum value.

Minimum

Allows you to search for the minimum value.

Maximal

Allows you to search for maximal values. When the envelope is used, the instrument 

searches maximum value data for maximal values.

Minimal

Allows you to search for minimal values. When the envelope is used, the instrument 

searches minimum value data for minimal values.

 • If search results have two or more maximum or minimum values, the instrument displays any one of them as 

a representative value among the search results.

 • Search results have multiple maximal or minimal values

7 

(When you choose 

[Maximal]

 or 

[Minimal]

 in the 

[Type]

 box)

Tap the 

[Filter(samples)]

 box, and then from the list, choose a decision condition for 

maximal or minimal values.

Off

Regards a value as a maximal value when it is larger than the values found one point 

before and after, and a minimal value when it is smaller.

10

 to 

10,000

Regards a value as a maximal value when it is larger than any other value in the range 

between the specified points before and after, and a minimal value when it is smaller.

8 

(When you choose 

[Maximal]

 or 

[Minimal]

 in the 

[Type]

 box)

Tap the 

[Display order]

 box, and then from the list, choose a sequence to sort.

Sort by time

Displays the search results in chronological order. You cannot set the 

[Number to display]

 box. The instrument handles up to 1000 search results. The 

instrument stops the search if it retrieves more than 1000 results.

Sort by data

With the 

[Maximal]

 setting, displays search results the number of which is specified in 

the 

[Number to display]

 box in descending order. With the 

[Minimal]

 setting, displays 

them in ascending order.

(When you choose 

[Sort by data]

 in the 

[Display order]

 box)

Tap the 

[Number to display]

 box, and then enter the number of search results to be 

displayed.

9 

Tap 

[Execute]

.

The instrument puts search marks ( ) on positions where the search condition is satisfied.
The 

[Search Pos.]

 switching panel appears on the waveform screen.

To stop the search

Press the 

STOP

 key.

Search Function

HIOKI MR6000A966-03

Содержание Memory HiCorder MR6000









































































































































































































































































































































































































Отзывы:

Нет отзывов