HDG Compact 25, Руководство по эксплуатации

Страница: 95 / 108

7 Cleaning and servicing the heating system – Requirements
95
C
LEANING THE ASH REMOVAL SYSTEM
1. Switch the heating system off.
✓
See the “HDG Control” operating manual, chapter “5 Using the
control unit”, section “5.3 Switching off the heating system”.
2. Allow the fire to burn out and cool down.
3. Turn the main switch off.
4. Remove both ash containers.
✓
See section “Checking and emptying the ash container” in this
chapter.
5. Set the two ash container clamp handles (3+5) in the horizontal
position.
6. Remove the cover of the ash removal door (4).
7. Undo the five fastening screws (SW19) (2).
8. Pull the ash removal door (6) forward off the ash removal augers.
9. Check the combustion chamber ash compartment (1) and the
heat exchanger ash compartment (7) for foreign bodies, encrusta-
tions or clumps of ash and remove these if necessary using a
cleaning tools (e.g. a scraper as included in delivery).
10. Mount the components in the reverse sequence.
11. Re-starting the heating system.
✎
See the “HDG Control” operating manual, chapter “5 Using the
control unit”, section “5.2 Switching on the heating system”.
✓
The ash removal system is now clean.
Important!
✎
Observe the “Generally applicable safety instructions” in this sec-
tion.
Figure 7/16 - Checking and cleaning the ash removal system
1
7 5 4 6
2
3