HDG Compact 25, Руководство по эксплуатации

Страница: 54 / 108

4 Planning and installation – Installing the heating system
54
I
NSTALLING THE FEEDING
SYSTEM
9. Slide the second seal (5) onto the adapter pipe (4).
10. Slide the feeding system (1) into the adapter pipe (4).
11. Insert the M12 screws (6) through the adapter tube (4) and
feeding system (1) from the boiler side.
12. Secure the M12 screws (6) with M12 nuts (size 19).
13. If applicable remove the connection bush (2), for the pressure
equalization tube, from the front of the feeding system (1).
14. Fit the DN40 plug (3) in to the front equalisation tube connection
(2) on the feeding system.
I
NSTALLING THE SUPPORT LEG
Warning!
Danger of injury
The feeding system is very heavy. Hands and feet could be crushed
when it is lifted.
Only lift the feed system using suitable lifting equipment.
Figure 4/28 - Attaching the feeding system
5 4 3 2 1 6
15. Fit the support leg (4) with a
19 mm M12 screw (3) onto the
feeding system (1).
16. Secure the support leg (4) to
the floor. (anchor srews are
not included in the scope of
the delivery).
17. Secure the two parts of the
support leg (4) with the two
M10 screws (size 17) (2).
Figure 4/29 - Fitting the support leg
3
1
4
2