HDG Compact 25, Руководство по эксплуатации

Страница: 51 / 108

4 Planning and installation – Installing the heating system
51
3. Bolt the crossbeams (1) onto the turbulators with the M12 (19
mm) screws (3) and allow about 2mm clearance between nuts and
turbulator/crossbeam retainer.
4. Lock the M12 nuts with the 19 mm M12 lock nuts.
M
OUNTING THE CLEANING
SHAFT LID
5. Unscrew the two 19 mm M12 nuts on the hinges (2) of the
cleaning shaft lid on the boiler.
6. Fold up the hinges (2).
7. Place the cleaning shaft lid (1) on the boiler.
8. Guide the screws (2) of the hinges into the holes on the cleaning
shaft lid (1).
9. Bolt on the cleaning shaft lid (1) with the M12 nuts on the hinges
using a 19 mm spanner.
Warning!
Danger of injury
The cleaning shaft lid is very heavy. Hands can become crushed
when installing it.
Always take care not to grasp under the cleaning shaft lid when
putting it on.
Figure 4/24 - Putting on the cleaning shaft lid
1
2