HBM GEN3i, Руководство пользователя

Страница: 188 / 1160

11.5
Option
-
Optical 1 Gbit Ethernet interface
The Interface/Controller supports an optical 1 Gbit Ethernet interface by means
of an SFP module. An SFP module is a small, form
-
factor and pluggable
transceiver that supports direct optical network connections.
WARNING
Laser Safety
The system is classified as a Class 1 laser product. The SFP uses an
optical light source for data and command communication. It does not
emit hazardous light, but direct exposure to the beam should be avoided.
This simple and powerful plug
-
in
-
and
-
use option enables the use of an optical
network connection on the Interface/Controller. There are two models available
to choose from:
l
1 Gbit (850 nm)
-
Multi Mode
l
1 Gbit (1310 nm)
-
Single Mode
A
B
Figure 11.17: SFP optical network device
A SFP shown with dust cap and removal bar
B
SFP label
-
850 or 1310 nm
Note 1310 nm Single Mode (SM) and 850 nm Multi Mode (MM) optical fiber
transceivers use specific cables and connectors. Therefore, make sure that the
correct mode/specification of fiber optic cable is used.
GEN3i
188 I3763-3.1 en HBM: public