HBM GEN3i, Руководство пользователя

Страница: 566 / 1160

Acquisition Modes
Single sweep
Triggered acquisition to on
-
board memory without sample rate limitations; for single
transients or intermittent phenomena. No aggregate sample rate limitations.
Multiple sweeps Triggered acquisition to on
-
board memory without sample rate limitations; for repetitive
transients or intermittent phenomena. No aggregate sample rate limitations.
Slow
-
Fast Sweep
Identical to single sweep acquisition with additional support for fast sample rate switches
during the post
-
trigger segment of the slow rate single sweep settings. No aggregate sample
rate limitations. Slow
-
Fast Sweep is not supported by the RT
-
FDB calculators.
Continuous Direct storage to PC or mainframe controlled hard disk without file size limitations; triggered
or un
-
triggered; for long duration recorder type applications. Aggregate sample rate
limitations depend on Ethernet speed, PC used and data storage media used.
Dual Combination of Multiple sweeps and Continuous; recorder type streaming to hard disk with
simultaneously triggered sweeps in on
-
board memory. Aggregate sample rate limitations
depend on Ethernet speed, PC used and data storage media used.
In Dual mode the RT
-
FDB calculators sample based results are only calculated for the
sweep sections of the recorded data. Due to the asynchronous nature of cycle based results,
all cycle based results are continuously stored and used in both the sweep as well as the
continuous sections of the recording.
Acquisition Mode Details
16 Bit Resolution
Recording Mode
Single Sweep
Multiple Sweeps
Slow
-
Fast Sweep Continuous Dual Rate
Enabled channels Enabled channels Enabled channels
1 Ch 6 Ch
6 Ch &
events 1 Ch 6 Ch
6 Ch &
events 1 Ch 6 Ch
6 Ch &
events
Max. sweep memory 100 MS 16 MS 14 MS not used 80 MS 13 MS 11 MS
Max. sweep sample rate 200 kS/s not used 200 kS/s
Max. continuous FIFO not used 100 MS 16 MS 14 MS 18 MS 3 MS 2.5 MS
Max. continuous sample
rate
not used 200 kS/s Sweep sample rate / 2
Max. aggregate
continuous streaming rate
not used
0.2 MS/s 1.2 MS/s 1.4 MS/s 0.2 MS/s 1.2 MS/s 1.4 MS/s
0.4 MB/s 2.4 MB/s 2.8 MB/s 0.4 MB/s 2.4 MB/s 2.8 MB/s
18 Bit Resolution
Recording Mode
Single Sweep
Multiple Sweeps
Slow
-
Fast Sweep Continuous Dual Rate
Enabled channels Enabled channels Enabled channels
1 Ch 6 Ch
6 Ch &
events &
Timer/
Counter 1 Ch 6 Ch
6 Ch &
events &
Timer/
Counter 1 Ch 6 Ch
6 Ch &
events &
Timer/
Counter
Max. sweep memory 50 MS 8 MS 5 MS not used 40 MS 6.5 MS 4 MS
Max. sweep sample rate 200 kS/s not used 200 kS/s
Max. continuous FIFO not used 50 MS 8 MS 5 MS 9 MS 1.5 MS 1 MS
Max. continuous sample
rate
not used 200 kS/s Sweep sample rate / 2
Max. aggregate
continuous streaming rate
not used
0.2 MS/s 1.2 MS/s 1.8 MS/s 0.2 MS/s 1.2 MS/s 1.8 MS/s
0.8 MB/s 4.8 MB/s 7.2 MB/s 0.8 MB/s 4.8 MB/s 7.2 MB/s
Single Sweep
Pre
-
trigger segment
0% to 100% of selected sweep length
If trigger occurs before the pre
-
trigger segment is recorded, the pre
-
trigger segment is
truncated to recorded data only.
Delayed trigger Maximum 1000 seconds after a trigger occurred. The sweep is recorded immediately after
a delayed trigger time with 100% post
-
trigger after this time point.
GEN3i
566 I3763-3.1 en HBM: public