Harris ATLAS ANALOGUE, Руководство пользователя

Страница: 106 / 134

3-32 888-2523-001 7/26/05
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
ATLAS Analogue
•
AC Line Frequency: Should reflect your line frequency - 50Hz or 60Hz
•
Exciters: Select number of exciters for this system
•
Output Switch: Selects Manual or Motor output switching
•
Cooling Pumps: Select number of cooling pumps for this system
Figure 3-31 System Setup Screen
3.9.4.1.1 Control Setup
•
Date: This screen allows the user to set the Date which will be used for reporting and
for the fault log
•
Time: This screen allows the user to set the Time which will be used for reporting
and for the fault log
•
LCD Contrast: For adjustment of the contrast of the GUI LCD display (see "5.6.4
LCD Contrast Adjustment" on page 5-18). The display contrast will adjust dynami-
cally as the number is changed to allow for room lighting.
•
Screen Saver: It allows the user to select how long it will take for the screen to blank
out due to inactivity
•
Password: Allows user password setup
NOTE:
If the password is forgotten, enter 1895 to unlock the system ("backdoor" pass-
word).
•
Touch Cal. - This button navigates to the Touch Screen Calibration screens
To Figure 3-32
To Figure 3-30