Harris ATLAS ANALOGUE, Руководство пользователя

Страница: 80 / 134

3-6 888-2523-001 7/26/05
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
ATLAS Analogue
The quickest way to access the HOME screen is to press any of the 5 hardware buttons
to the right of the display as there is a HOME button on each of those main menu
screens,
There are always five touchscreen navigation buttons on the right side of the display.
These are different on almost every screen and, with the exception of the HOME screen,
do not relate to the hardware buttons on the front panel just to the right of the display.
These can also act as status indicators and turn red if a fault condition is detected.
There is a navigation button (shown to the right) to allow access to
information specific to the PA cabinet. Pressing this button will take you
to the Power Amp screen shown in Figure 3-7 on page 3-10.
This button is also a metering and status indicator for the PA cabinet as it
shows forward power (before the filter) and will change from OK to Fault,
if a problem is detected in that cabinet as shown to the right.
NOTE:
To simplify the discussion of GUI navigation, the following will navigate and
describe all of the screens under each of the 5 main menu buttons located to the
right of the touchscreen display (and on the right side of the GUI Home page).