GRAUPNER JetCat 6810, Руководство пользователя

Страница: 100 / 210

Helicopter mechanics
with model turbine engine
30
12. General safety measures
•
Take out adequate third-party insurance cover.
•
Wherever possible join the local model flying club.
12.1 At the flying site:
•
Never fly your model above spectators.
•
Do not fly models close to buildings or vehicles.
•
Avoid flying over agricultural workers in neighbouring fields.
•
Do not fly your model in the vicinity of railway lines, major roads or overhead cables.
12.2 Pre-flight checks, flying safety:
•
Before you switch on the transmitter check carefully that no other model flyer is using the
same frequency.
•
Carry out a range check with your RC system.
•
Check that the transmitter and receiver battery are fully charged.
•
Keep a C0² fire extinguisher to hand at all times.
•
Whenever the motor is running take particular care that no item of clothing can get caught
on the throttle stick.
•
Do not let the model fly out of safe visual range.
•
There should always be a safe reserve of fuel in the tank. Never keep flying until the fuel
runs out.
12.3
Post-flight checks:
•
Clean oil residues and dirt from the model and check that all screws etc. are still tight.
•
Look for wear and damage to the helicopter, and replace worn parts in good time.
•
Ensure that the electronic components such as battery, receiver, gyro etc. are still securely
fixed. Remember that rubber bands deteriorate with age and may fail.
•
Check the receiver aerial. Conductor fractures inside the flex are often not visible from the
outside.
•
If the main rotor should touch the ground when spinning, replace the blades. Internal blade
damage may not be visible from the outside.