GRAUPNER JetCat 6810, Руководство пользователя

Страница: 128 / 210

Helicopter mechanics
with model turbine engine
58
Smoker System
The ECU can directly control a valve for blowing smoke fluid / diesel fuel into the exhaust efflux
(
smoke generation). The smoker system is available as a kit, oder no. 6800.18. The function
of the smoker valve can be adjusted in the Limits menu (parameter: “SmokerValve Ctrl”).
Possible options for the “SmokerValve Ctrl” parameter ( LIMITS menu) are:
Option Description
DISABLED Smoker valve not used.
The valve is always closed!
Open if AuxSw=0
(*)
Smoker valve is opened when the AUX switch (3-position switch) is moved
to the
back (“OFF”) position and when the turbine is running.
If you wish to be able to use this function, the AUX switch must be active,
i.e. the “AUX-channel func” parameter (see below) must not be set to “NOT
USED”.
Open if AuxSw=2
(*)
Smoker valve is opened when the AUX switch (3-position switch) is moved
to the
forward (“ON”) position and when the turbine is running.
If you wish to be able to use this function, the AUX switch must be active,
i.e. the “AUX-channel func” parameter (see below) must not be set to “NOT
USED”.
(*) The function of the smoker valve can be tested when the turbine is not running:
1. Set the rpm-slider to idle or OFF (otherwise there is danger that the fuel pump will start running
during the subsequent test process!). For safety’s sake disconnect the fuel line to the turbine.
2. Press and hold the "Manual" button (-> yellow LED flashes). The valve can now be operated using
the AUX switch (3-position switch on transmitter).