manualshive.com logo in svg

GE Multilin PQM, Инструкция по эксплуатации

Устройство GE Multilin PQM - мощный и надежный средство для мониторинга качества электроэнергии. Инструкция по эксплуатации доступна для бесплатного скачивания на нашем сайте. Получите подробное руководство по использованию устройства GE Multilin PQM прямо сейчас на manualshive.com.

Поделиться
Скачать
background image

5–12

PQM POWER QUALITY METER – INSTRUCTION MANUAL

A1 METERING

CHAPTER 5: MONITORING

THREE PHASE/A/B/C POWER FACTOR: 

The three phase true power factor as well as the 

individual phase A/B/C true power factors is displayed in these messages. The phase A/B/C 
true power factor messages will be displayed only for a WYE or 3 WIRE DIRECT connected 
system. 

THREE PHASE/A/B/C kW MINIMUM: 

The minimum three phase real power as well as the 

minimum individual phase A/B/C real power is displayed in these messages. The time and 
date at which these minimum values were measured is also displayed in these messages. 
This information is stored in non-volatile memory and will be retained during a loss of 
control power. The phase A/B/C minimum real power messages will be displayed only for a 
WYE connected system. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR MIN/

MAX POWER VALUES

 is used to clear these values.

THREE PHASE/A/B/C kvar MINIMUM: 

The minimum three phase reactive power as well as 

the minimum individual phase A/B/C reactive power is displayed in these messages. The 
time and date at which these minimum values were measured is also displayed in these 
messages. This information is stored in non-volatile memory and will be retained during a 
loss of control power. The phase A/B/C minimum reactive power messages will be 
displayed only for a WYE connected system. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR  MIN/MAX  POWER  VALUES

 is used to clear these 

values.

THREE PHASE/A/B/C kVA MINIMUM: 

The minimum three phase apparent power as well as 

the minimum individual phase A/B/C apparent power is displayed in these messages. The 
time and date at which these minimum values were measured is also displayed in these 
messages. This information is stored in non-volatile memory and will be retained during a 
loss of control power. The phase A/B/C minimum apparent power messages will be 
displayed only for a WYE connected system. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR  MIN/MAX  POWER  VALUES

 is used to clear these 

values.

THREE PHASE/A/B/C PF MINIMUM: 

The minimum three phase lead or lag power factor as 

well as the minimum lead or lag individual phase A/B/C power factor is displayed in these 
messages. The time and date at which these minimum values were measured is also 
displayed in these messages. This information is stored in non-volatile memory and will be 
retained during a loss of control power. The phase A/B/C minimum lead or lag power factor 
messages will be displayed only for a WYE connected system. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR MIN/MAX POWER VALUES

 is used to clear these 

values.

THREE PHASE/A/B/C kW MAXIMUM: 

The maximum three phase real power as well as the 

maximum individual phase A/B/C real power is displayed in these messages. The time and 
date at which these maximum values were measured is also displayed in these messages. 
This information is stored in non-volatile memory and will be retained during a loss of 
control power. The phase A/B/C maximum real power messages will be displayed only for a 
WYE connected system. The setpoint 

S1 PQM SETUP \ CLEAR DATA \ CLEAR MIN/

MAX POWER VALUES

 is used to clear these values.

THREE PHASE/A/B/C kvar MAXIMUM: 

The maximum three phase reactive power as well 

as the maximum individual phase A/B/C reactive power is displayed in these messages. 
The time and date at which these maximum values were measured is also displayed in 
these messages. This information is stored in non-volatile memory and will be retained 

Courtesy of NationalSwitchgear.com

Содержание Multilin PQM





























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Multilin PQM

ICP DAS USA PM-3133i User Manual preview
PM-3133i
Бренд: ICP DAS USA Страницы: 71
ICS HYDROTECHNIK MultiHandy 2025 Quick Manual preview
HYDROTECHNIK MultiHandy 2025
Бренд: ICS Страницы: 8
ICT International PSY1 Manual preview
PSY1
Бренд: ICT International Страницы: 24
J.P. Instruments EDM-900 Pilot'S Manual Addendum preview
EDM-900
Бренд: J.P. Instruments Страницы: 9
J.ASSY VISUM Monitor Technical Manual preview
VISUM Monitor
Бренд: J.ASSY Страницы: 13
WAGNER Datamaster Manual preview
Datamaster
Бренд: WAGNER Страницы: 9
X-Rite DensiEye 100 Reference Manual preview
DensiEye 100
Бренд: X-Rite Страницы: 50
Major tech MT975 Instruction Manual preview
MT975
Бренд: Major tech Страницы: 16
Zoetis AlphaTRAK Instructions For Use preview
AlphaTRAK
Бренд: Zoetis Страницы: 2
Bacharach SF6 Portable Monitor Specifications preview
SF6 Portable Monitor
Бренд: Bacharach Страницы: 2
Aktobis WDH-318KC Manual preview
WDH-318KC
Бренд: Aktobis Страницы: 7
PCB Piezotronics IMI SENSORS 604B11 Installation And Operating Manual preview
IMI SENSORS 604B11
Бренд: PCB Piezotronics Страницы: 19
Sierra C100L-L-DD-LE-5-OV1-SV1-PV1C-V1-S1 Instruction Manual preview
C100L-L-DD-LE-5-OV1-SV1-PV1C-V1-S1
Бренд: Sierra Страницы: 55
iDigit A570 Ambient Monitor Instruction Manual preview
A570 Ambient Monitor
Бренд: iDigit Страницы: 15
Laguna Tools Laser MX Owner'S Manual preview
Laser MX
Бренд: Laguna Tools Страницы: 28
Keison 18853 Manual preview
18853
Бренд: Keison Страницы: 56
Dairymaster MOOMONITOR + User Manual preview
MOOMONITOR +
Бренд: Dairymaster Страницы: 14
BRUEL & KJAER 2307 Service Instruction preview
2307
Бренд: BRUEL & KJAER Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды