GE Fuji Electric MICRO-SAVER AF-300, Руководство для стартапов

Страница: 123 / 127

10-1
10. Compliance with Standards
10.1 Compliance with UL Standards and
Canadian Standards (cUL certification)
10.1.1 General descriptions
Originally, the UL standards were established by
Underwriters Laboratories, Inc. as private criteria for
inspections/investigations pertaining to fire/accident
insurance in the USA. Later, these standards were
authorized as the official standards to protect operators,
service personnel and the general populace from fires
and other accidents in the USA.
cUL certification means that UL has given certification
for products to clear CSA Standards. cUL certified
products are equivalent to those compliant with CSA
Standards.
10.1.2 Considerations when using AF-300 Mini in
systems to be certified by UL and cUL
If you want to use the AF-300 Mini series of drives as a
part of a UL Standards or CSA Standards (cUL certified)
certified product, refer to the related notes described on
page vii.
10.2 Compliance with European Standards
The CE marking on GE Fuji products indicates that they
comply with the essential requirements of the Electro-
magnetic Compatibility (EMC) Directive 89/336/EEC
issued by the Council of the European Communities and
Low Voltage Directive 73/23/EEC.
Only the EMC filter built-in type of drives that bear a CE
marking is compliant with these EMC Directives.
Drives that bear a CE marking or TÜV mark are compli-
ant with the Low Voltage Directive.
The products comply with the following standards:
Low Voltage
Directive EN50178 1997
EMC
Directives EN61800-3 1996+A11 : 2000
EN55011
1998+A: 1999
Immunity Second environment
(EN61800-3+A11 Indus-
trial)
Emission Class 1A (A1)
(Applicable only to the EMC filter built-in type of drives)
CAUTION
The AF-300 Mini series of drives are categorized as a
“restricted sales distribution class" of the EN61800-3.
Therefore, when you use these products with any home
appliances or office equipment, you may need to take
appropriate countermeasures to reduce or eliminate any
noise emitted from these products.
10.3 Compliance with EMC Standards
10.3.1 Scope
The CE marking on the EMC filter built-in type of drives
does not ensure that the entire equipment including our
CE-marked products is compliant with the EMC Direc-
tive. Therefore, CE marking for the equipment shall be
the responsibility of the manufacturer. For this reason,
GE Fuji’s CE mark is indicated under the condition that
the product shall be used within equipment meeting all
requirements for the relevant Directives. Implementation
of such equipment shall be the responsibility of the
manufacturer.
Generally, machinery or equipment may include not only
our products but other devices as well. Manufacturers,
therefore, shall design the whole system to be compliant
with the relevant Directives.
In addition, to satisfy the requirements noted above, use
the EMC filter built-in type of drives according to the
descriptions contained in this instruction manual. Install-
ing the drive(s) in a metal-shielded control board may be
necessary, depending upon the operating environment
of the equipment that the drive is to be used with.
10.3.2 Recommended installation
To make the machinery or equipment be fully compli-
ant with the EMC Directive, have certified technicians
wire the motor and drive in strict accordance with the
procedure described below.
Use EMC filter built-in type of drives.
(1) Mount the EMC grounding flange (that comes with
the drive) to the drive with screws in order to ground
the wire shield(s). (See Figure 10.1.)
Figure 10.1 Attaching the EMC Grounding Flange
StockCheck.com