GE Fuji Electric MICRO-SAVER AF-300, Руководство для стартапов

Страница: 29 / 127

2-8 2-9
2.3.6 Wiring for Control Circuit Terminals
Warning
The outer jacket of control circuit cable is generally not
insulated for high voltage levels. Therefore if the control
circuit cabling comes into direct contact with the live
main circuit terminal, the insulation may be insufficient.
Accordingly, there is a possibility that DANGEROUSLY
high voltage from the main power circuit could be
applied to the control circuit wires. Be sure to keep the
control wires away from the live main circuit terminals.
An accident or electric shock could occur.
Caution
Noise may be emitted from the drive, motor and wires.
Implement appropriate measures to prevent malfunc-
tioning due to noise.
An accident could occur.
Table 2.4 lists the symbols, names and functions of the
control circuit terminals. The wiring to the control circuit
terminals may differ depending upon drive set-up using
function codes.
Figure 2.12 Example of Control Circuit Wiring
Replace the main circuit TB cover and then connect
wires to the control circuit terminals. As shown in Figure
2.12, pull the wires out through the guides on the main
circuit TB cover. Route these wires correctly to reduce
the influence of noise, referring to the notes on the
following pages.
StockCheck.com