GE Fuji Electric MICRO-SAVER AF-300, Руководство для стартапов

Страница: 44 / 127

3-8 3-9
Figure 3.3 Monitor Item Selection Example
*1 The speed monitor can display the output frequency (Hz), set frequency (Hz), load shaft speed (rpm), line speed
(m/min.), and constant feeding rate time (min.) which can be selected by with function code E48.
*2 This PID-related information will appear only when the drive is under the PID control. (Refer to Section 3.3.)
*3 This will appear only when timer operation is enabled by setting up function code C21. (Refer to Chapter 5.)
Table 3.2 lists the display items for the speed monitor that can be chosen with function code E48.
Table 3.2 Display Items on the Speed Monitor
Speed monitor items
Function code
E48 data
Meaning of Displayed Value
Output frequency (before slip compensation) (Hz)
(Factory default)
0 Before slip compensation frequency
Output frequency (after slip compensation) (Hz) 1 Frequency actually being output
Set frequency (Hz) 2 Final set frequency
Load shaft speed (rpm) 4 Display value = Output frequency (Hz) x E50*
Line speed (m/min) 5 Display value = Output frequency (Hz) x E50*
Constant feeding rate time (min) 6
Display value = * E50/Output frequency x E39
*
Output frequencies contained in these formulas are output frequencies before slip compensation.
StockCheck.com