manualshive.com logo in svg

GE Fuji Electric MICRO-SAVER AF-300, Руководство для стартапов

Инструкция по эксплуатации FUJI Electric MICRO-SAVER AF-300 доступна для бесплатного скачивания на {веб-сайте}. Этот руководство поможет вам правильно настроить и использовать ваш продукт. Следуйте инструкциям в руководстве для оптимальной работы устройства. Скачайте его прямо сейчас с {веб-сайта}.

Поделиться
Скачать
background image

ii

iii

Preface

Thank you for purchasing an AF-300 Mini series drive.
This product is designed to control a 3-phase induction 
motor only. Read through this instruction manual and 
make yourself familiar with proper use of the drive.
Improper use could prevent normal operation and result 
in failure or reduced life of the drive.
Deliver this manual to the end user of the product. Keep 
this manual in a safe place until the drive is no longer in 
service.

Safety precautions

Read this manual thoroughly before proceeding with 
installation, connecting or wiring, operation, or 
maintenance and inspection. Ensure you have sound 
knowledge of the device and familiarize yourself with all 
safety information and precautions before proceeding to 
operate the drive.
Safety precautions are classified into the following two 
categories in this manual.

WARNING

Failure to heed the information indicated by this symbol 
may lead to dangerous operation, and could result in 
risk of death or serious bodily injury.

CAUTION

Failure to heed the information indicated by this symbol 
may lead to dangerous operation, and could result in mi-
nor bodily injuries and/or substantial property damage.
Failure to heed the information contained under the 
CAUTION title can also result in serious consequences. 
These safety precautions are of utmost importance and 
must be observed at all times.

Purposes

WARNING

•  The AF-300 Mini is designed to drive a 3-phase 

induction motor only. Never use it for 1-phase mo-
tors or for any other purpose. 

 

Fire or an accident could occur.

•  The AF-300 Mini must not be used for any life-sup-

port system or other purpose directly related to 
human safety.

•  Although the AF-300 Mini is manufactured under 

strict quality control, be sure to install appropriate 
safety devices for applications where drive failure 
could result in serious accident or material loss. 

 

An accident could occur.

Installation

WARNING

•  Install the drive on a nonflammable material base 

such as metal. 

 

Otherwise fire could occur.

•  Do not place flammable matter nearby. 
 

Doing so could cause fire.

CAUTION

•  Do not support the drive by its cover during trans-

portation. 

 

The cover could detach, allowing the drive to 

drop, with risk of injury.

•  Prevent lint, paper fibers, sawdust, dust, metallic 

chips, or other foreign materials from getting into 
the drive, or from accumulating on the heat sink.

 

Doing so could cause fire or an accident.

•  Do not install or operate a drive that is damaged 

or missing any parts. Doing so could cause fire, 
accident or injuries.

•  Do not stand or sit on a shipping box.
•  Do not stack shipping boxes higher than indicated 

by the information printed on those boxes.

 

Doing so could cause injuries.

Wiring

WARNING

•  The drive should be wired to its power source 

through a recommended molded case circuit 
breaker (MCCB) and a ground fault circuit interrupt-
er (GFCI). Apply protective devices of the correct 
current range.

•  Use wiring of the specified size.
 

Otherwise, fire could occur.

StockCheck.com

Содержание Fuji Electric MICRO-SAVER AF-300
































































































































Отзывы:

Нет отзывов

Похожие инструкции для Fuji Electric MICRO-SAVER AF-300

Magnetek P3 Series Product Transition Manual preview
P3 Series
Бренд: Magnetek Страницы: 24
SunStar Fortuna IV Series User Manual preview
Fortuna IV Series
Бренд: SunStar Страницы: 20
Wheatstone iK series User Manual preview
iK series
Бренд: Wheatstone Страницы: 207
Dynex 5232IM User Manual preview
5232IM
Бренд: Dynex Страницы: 19
Arkel ADrive VVVF User Manual preview
ADrive VVVF
Бренд: Arkel Страницы: 166
Bodine 2982 Installation & Operation Manual preview
2982
Бренд: Bodine Страницы: 44
STG-BEIKIRCH EM S Tandem AC Technical Information And Operating Instruction preview
EM S Tandem AC
Бренд: STG-BEIKIRCH Страницы: 25
Omron 3G3RX Series User Manual preview
3G3RX Series
Бренд: Omron Страницы: 442
Parker Hauser COMPAX 02 M F1 Series Operating Instructions Manual preview
Hauser COMPAX 02 M F1 Series
Бренд: Parker Страницы: 12
Rockwell Automation Allen-Bradley PowerFlex 520 Series User Manual preview
Allen-Bradley PowerFlex 520 Series
Бренд: Rockwell Automation Страницы: 272
Simu DMI 6 Original Instructions preview
DMI 6
Бренд: Simu Страницы: 2
Simu T5 AUTO+JOB Series Original Instructions Manual preview
T5 AUTO+JOB Series
Бренд: Simu Страницы: 8
Gigabyte E-IDE COMBO Quick Installation Manual preview
E-IDE COMBO
Бренд: Gigabyte Страницы: 2
Helios 05459-001 Installation And Operating Specification preview
05459-001
Бренд: Helios Страницы: 68
Radio Shack 25-3052 Owner'S Manual preview
25-3052
Бренд: Radio Shack Страницы: 12
Danfoss VLT 5000 Series Instruction preview
VLT 5000 Series
Бренд: Danfoss Страницы: 4
Yolico YD3000N Series Instruction Manual preview
YD3000N Series
Бренд: Yolico Страницы: 139
ZF-DUOPLAN 2K120 Operating Instructions Manual preview
2K120
Бренд: ZF-DUOPLAN Страницы: 31

Бренды по названию

Популярные бренды

Загрузить еще бренды