GE 600-1021-95R Скачать руководство пользователя страница 71

Страница: 71 / 113

Concord 4 Series Systems

Set Up Schedules Menu

The

SET UP SCHEDULES

menu lets you set up time frames for light control, output control, auto-

matic arming, latchkey times, and exception opening/closing reports

The system (all partitions)

allows you to set up to 16 schedules (00–15) which are shared by all partitions.
Setting up schedules consists of setting a start and stop time for each schedule, then selecting

which days of the week the schedule will be active. You can also set up a

rollover

schedule,

which starts on one day and ends on another day. This saves programming time and leaves more

schedules available (in case they are needed later).

Rollover Schedule Example:

To set up a schedule to rollover from Tuesday evening to Wednes-

day morning, set a schedule start time for 2200 (10:00

.) and a stop time for 0500 (5:00

.).

Set the schedule to turn on Tuesday. Because the stop time is set for morning, the system auto-

matically carries the schedule over to the next day.
If you use the same start and stop times described above and set the schedule to turn on Monday

through Friday, then one schedule will cover the entire week.

Touchpad Brightness

(043)

Options (Default = 2)

This setting lets the user lighten or darken the background on

touchpad displays. Each touchpad can be set to compensate for

lighting conditions in the touchpad location.

To adjust Touchpad Brightness:

1. Press A or B until the display shows

OPTIONS

2. Press #, then A or B until the display shows

TOUCHPAD

BRIGHTNESS n

(current setting)

3. Enter a setting from 0 (darkest background) to 3 (brightest

background). The display flashes the entered selection.

Press

# and the display shows the new setting.

Volume

(044)

Options (Default = 4)

This setting determines the volume level of status

sounds from speakers connected to the Phone Interface/

Voice Module or Voice Only Module.

Note

This menu appears only if a Phone Interface/Voice Module

or a Voice Only Module is connected to the panel.

To adjust status sound Volume:

1. Press A or B until the display shows

OPTIONS

, then press #.

2. Next, press A or B until the display shows

VOLUME n

(current

setting)

3. Enter a setting from 0 (off) to 7 (loudest). The display flashes the

entered selection. Press

# and the display shows the new setting.

Voice Chime

(045)

Options (Default = on)

This setting determines whether speakers connected to

the Phone Interface/Voice Module or Voice Only Mod-

ule announce perimeter sensor/zone numbers that are

tripped when the Chime feature is on. For example,

“Sensor one open.”

Note

This menu appears only if a Phone Interface/Voice Module

or a Voice Only Module is connected to the panel.

To turn Voice Chime off or on:

1. Press A or B until the display shows

OPTIONS

2. Press # then A or B until the display shows

VOICE CHIME OFF/

(current setting)

3. Press 1 (off) or 2 (on). The display flashes the entered selection.

Press

# and the display shows the new setting.

Chime On Close

(046)

Options (Default = off)

When this setting is on, the panel sounds a single chime

when a perimeter door or window is closed.

To turn Chime On Close off or on:

1. Press A or B until the display shows

OPTIONS

2. Press # then A or B until the display shows

CHIME ON CLOSE

OFF/ON

(current setting)

3. Press 1 (off) or 2 (on). The display flashes the entered selection.

Press # and the display shows the new setting.

WWW.DIYALARMFORUM.COM

Содержание 600-1021-95R


















































































































Результаты поиска

Содержание 600-1021-95R

Отзывы:

Похожие инструкции для 600-1021-95R

Бренды по названию

Популярные бренды

GE 600-1021-95R, Руководство по установке

Результаты поиска

Содержание 600-1021-95R

Отзывы:

Похожие инструкции для 600-1021-95R

Бренды по названию

Популярные бренды