GE 600-1021-95R Скачать руководство пользователя страница 30

Страница: 30 / 113

Concord 4 Series Systems

Arrows pointing right or down represent pressing B or # to advance forward through the menus.

Arrows pointing left or up represent pressing A or * to move through the menus in reverse. Only

when

SYSTEM PROGRAMMING

is displayed can you advance to tier 2 menus.

Only when a specific menu is displayed can you advance to those menu settings. For example,

from the

SENSORS

menu pressing # gives you access to learning sensors, programming sensor

text, deleting sensors, and viewing/editing sensor programming. Settings in tier 2 menus can also

be accessed by entering shortcut numbers. See the section, “Programming Tier 2 Menu Items”

for complete details.

Programming Tier 1 Menu Items

This section guides you through programming tier 1 menu items as they appear in sequence. The

exact order you follow will depend on whether you’re installing a new system or changing pro-

gramming in an existing system.

Demo Kit Mode (System Programming)

(Default = off) Determines whether the panel is used for a standard installation (off) or as a demo

kit (on). When the Demo Kit option is on, only sensors learned into groups 01 and 03, duress

code use, and phone test (8 + System Master Code + 2) will be reported. Turning on this feature

and performing a memory clear changes the following settings:
•

Partition 1 Master Code = 1000

•

Partition 2 Master Code = 2000

•

User Code 00 = 1001 (partition 1 code—can also be used to jump to partition 2)

•

User Code 01 = 1002 (partition 1 code—can also be used to bypass sensors)

•

User Code 02 = 2001 (partition 2 code—can also be used for remote or off-site access)

•

User Code 03 = 2002 (partition 2 code—can also be used to perform system tests)

•

User Code 04 = 1122 (partition 1 code—can also be used to jump to partition 2, for remote

or off-site access, and system tests)

•

User Code 05 = 2233 (partition 2 code—can also be used to jump to partition 1, for remote

or off-site access, bypassing sensors, and system tests)

•

Partition 1 House Code = 255 (P)

•

Partition 2 House Code = 254 (O)

•

Zone 1 (hardwire input 1) = Group 10, Front Door

•

Zone 2 (hardwire input 2) = Group 13, Bedroom Window

•

Zone 3 (hardwire input 3) = Group 17, Living Room Motion Sensor

•

Zone 4 (hardwire input 4) = Group 1, Panic

•

Zone 5 (wireless, keychain touchpad, ID F00201) = Group 01, (no text)

•

Zone 6 (wireless, DWS, ID A00206) = Group 13, Kitchen Window

•

COMM FAILURE = off Demo Kit = on

•

AVM code = 1212

•

Entry Delay = 8 sec

•

Exit Delay = 8 sec

•

Extended Delay = 1 minute

•

Siren Timeout = 2 minutes

To turn Demo Kit Mode off or on:

1. With the display showing

DEMO KIT MODE OFF/ON

(current setting)

, press 1

(off)

or 2 (on),

then press #.

2. The display flashes the entered setting, then stops after pressing # and displays

DEMO KIT

MODE OFF/ON

(new setting)

Partition 1 Copy (System Programming)

(Default = none) After programming all settings pertaining to partition 1, you can make an exact

copy to use for partitions 2-6. This helps reduce programming time when the system is set up for

multiple partitions. If there are certain settings that are unique to partitions 2-6, simply advance

to the appropriate menu and make the necessary changes.

To Copy Partition 1:

With the display showing

PARTITION 1 COPY

, press # +

installer CODE

+ #. The display

flashes, then stops after pressing # and shows

DONE

WWW.DIYALARMFORUM.COM

Содержание 600-1021-95R


















































































































Результаты поиска

Содержание 600-1021-95R

Отзывы:

Похожие инструкции для 600-1021-95R

Бренды по названию

Популярные бренды

GE 600-1021-95R, Руководство по установке

Результаты поиска

Содержание 600-1021-95R

Отзывы:

Похожие инструкции для 600-1021-95R

Бренды по названию

Популярные бренды