GE 600-1021-95R Скачать руководство пользователя страница 33

Страница: 33 / 113

Concord 4 Series Systems

Multi-Partition Arm/Disarm (0005)

Security-Global (Default = none)

Controls which partitions can be armed/disarmed simultaneously when using a

touchpad and access code assigned to those partitions. When enabled, users can

arm/disarm selected partitions using an authorized access code. When disabled,

multiple partitions cannot be armed/disarmed simultaneously.
•

At least two partitions must be selected for this feature to work.

•

Touchpads must be assigned to at least one of the selected partitions of this

menu for this feature to work.

•

Access codes must be assigned to all selected partitions of this menu for

this feature to work. If the partition assignment for a specific access code

does not match the partitions selected in this menu, only those partitions

common to both menu settings can be armed/disarmed simultaneously

with that code.

•

A partition cannot be armed/disarmed if it is being controlled by another

source at that time.

•

All arming modifiers (No Delay, Latchkey, etc.) except Silent affect all

partitions being armed. Only the arming partition can be armed silently.

•

When arming multiple partitions, any conditions that prevent arming

(open sensor, trouble, active alarm, etc.) are identified on touchpad dis-

plays with the affected partition number flashing. The normal protest/auto

force arm sequence follows, or pressing * cancels the arming request.

•

When disarming multiple partitions, any partitions in alarm have the

affected partition number flashing on touchpad displays. Pressing # can-

cels all alarms in the selected partitions. Alarm memory information is

then displayed for all canceled alarms.

To enable Multi-Partition Arm/Disarm:

1. With the display showing

MULTI-PTN

ARM/DISARM _

, press 1-6 to enter the

desired partitions (at least two). The dis-

play flashes the entered partitions.

2. Press # and the display stops flashing.

To disable Multi-Partition Arm/Disarm:

1. With the display showing

MULTI-PTN

ARM/DISARM n n n n n n n

, select all of the

displayed partitions by entering the

appropriate partition number. The parti-

tion numbers disappear from the display.

2. Press #.

WWW.DIYALARMFORUM.COM

Содержание 600-1021-95R


















































































































Результаты поиска

Содержание 600-1021-95R

Отзывы:

Похожие инструкции для 600-1021-95R

Бренды по названию

Популярные бренды

GE 600-1021-95R, Руководство по установке

Результаты поиска

Содержание 600-1021-95R

Отзывы:

Похожие инструкции для 600-1021-95R

Бренды по названию

Популярные бренды