83
6-10-2. Format HDD
This menu allows user to format connected hard disks. See sec. ‘5-1. Accessing MAIN Menu’
for information on making menu selections.
Note
To view page 2 of this menu, cursor select ID #7 and
move cursor ‘down’ to ID #8 (on page 2). Page 2 will be
automatically displayed. To return to page one, cursor
select ID #8 on page 2 and move cursor ‘up’ to ID #7 (on
page 1).
Settings
②
–
⑥
are not explained here as they are
explained in sec. ‘7-3. HDD Information’ previous.
Where:
①
ID (SCSI ID)
Used to access [FORMAT HDD] sub menu. Sub menu can be accessed if ID # has an
asterisk next to it. Cursor select asterisk marked ID # and push ENTER to access sub menu
for related drive. Select YES / NO in sub menu and push ENTER again to return to this menu.
Sub menu can only be accessed for hard disk drives having status codes NOT ASSIGNED,
HDD ERROR or EVENT ERROR.
Hard disks should be formatted when:
a)
Disk is first installed / connected to CDR-16T.
b)
Disk errors occur due to mechanical shock, age or overuse.
①
②
③
④
⑤
⑥
[FORMAT HDD]
1/2
ID
REC TIME
STATUS
REC
PLAY
#0 *
1H17M
NOT ASSIGNED
–
–
#1 –
2H34M
PB/REC USE
*
*
#2 –
2H34M
PB/REC USE
–
–
#3 –
2H34M
FORMAT 50%
–
–
#4 –
– – – –
NONE
–
–
#5 –
– – – –
NONE
–
–
#6 –
– – – –
NONE
–
–
#7 –
– – – –
NONE
–
–
TOTAL REC TIME –
5H08M
EXIT
(Continued following page.)
