18
4-2. Resetting to Factory Defaults
If you need to completely clear currently made operational settings, you can return recorder to
factory defaults and then make new settings.
◇
To return unit to factory default settings, proceed as below.
①
The CDR-16T can be returned to factory defaults at any time by momentarily holding
AUTO (indicated below) depressed while switching ON power.
②
Connected monitor will display ‘MEMORY CLEAR’ message while factory default settings
are being restored.
4-3. Screen Display
4-3-1. Full Screen
A basic full screen display example is given in the figure below. Item positions shown below
are factory default positions and should be visible if SUPER set to ON.
To set display (Super) ON or OFF, refer to sec. ‘7. Function Menu Settings. To select items to
be monitor displayed and recorded, refer to sec. ‘6-8. Display Mode’
(Continued following page.)
POWER
RE S E T
A LA RM
B
A
2
AUTO
1
DRIVE1
FAN ALM
DRIVE2
POWER
ON
OF F
①
