38
5. Using Menus
There are two key menu displays, which are used to make all the main operational setup and
programming during CDR-16T use;
MAIN
and
FUNCTION
.
5-1. Accessing MAIN Menu
The MAIN Menu and it’s related Sub Menus are used to make all general operational settings
and to display related settings. Push small non-metallic tool into Main Menu hole to push access
Main Menu button.
When MENU is pushed, a MAIN (top) menu similar to below will be monitor displayed.
u
Accessing Sub Menus From Main Menu
There are 3 ways you can select a sub menu from this menu.
Ø
Procedure 1:
(dial / ENTER )
Turn jog / shuttle dial to move selection cursor in menu to required item. Push ENTER to go to
sub menu or exit.
Ø
Procedure 2:
(arrow buttons
↓
/
↑
/ ENTER )
Push arrow buttons to move selection cursor in menu to required item. Push ENTER to go to
sub menu or exit.
Ø
Procedure 3:
(1 button access)
This procedure can only be used in menu shown above.
Push CAMERA SELECT button with matching number.
Example: Push 2 (SPLIT POSITION), to go to ‘SPLIT POSITION’ sub menu.
(Continued following page.)
(Continued following page.)
MAIN MENU
→
1
PROTECT
2
SPLIT POSITION
3
RECORD
4
TIMER PROGRAM
5
AUTO SEQ TIME
6
TITLE
7
DATE / TIME
8
DISPLAY MODE
9 ALARM / LOSS / SENSOR
10
HDD
11
OTHER
12 SYSTEM
13 SENSOR
14 DVD
15 EXIT
Cursor selected
