37
4-6-3. Playback and Search
Important
Record interval must be set to 0.10 sec. or more to use
simultaneous record and playback function. See sec.
‘6-3-5. Regarding Timelapse / Update Mode Setting’ for
setting related information.
u
To Start Playback of Recorded Material:
①
Push LV/PB to unlit, then push PLAY to lit. Playback of recorded material will begin.
②
Select full screen camera (see sec. ‘4-4. Full Screen Display Operations’) or split screen
pattern and group (see sec. ‘4-5. Split Screen Display Operations’) for view.
Important
When PLAY is pushed, playback will start from the
timeline position where previously stopped. (On first use
playback will start at the beginning of the recorder
timeline.)
u
To Stop Playback / Start Jog Search of Recorded Contents:
①
Push JOG/SHTL once to lit. PLAY goes unlit. Playback stops.
②
Turn jog / shuttle dial right to jog video forward 1 frame at a time, turn left to jog in
reverse.
u
To Start Shuttle Search of Recorded Contents:
①
Push JOG/SHTL a second time (still lit). PLAY goes to lit again.
②
Turn jog / shuttle dial right to forward shuttle search, left to shuttle search in reverse.
Note that search speed will be determined by how far dial is turned left or right. Shuttle
search speed range is from x 1/64 to x 128 of real time.
③
Push JOG/SHTL again to stop shuttle search operation.
①
④
②
③
CDR-16T
D ig ita l R eco rd e r
REV
FWD
Z O OM
C H
ST OP
JO G/ SHT L
CONTROL
PL AY
* L V/PB
M ENU
MONITOR
SPL IT
7
8
9
10
1 1
1 2
1 3
1 5
14
1 6
ENT ER
F UN C
RE C
