106
9-2. DVD Menu screen
If your CDR-16T has an optional DVD-RAM drive installed, you will need to make sensitivity and
other settings before using the DVD-RAM option. See sec. ‘5-1. Accessing MAIN Menu’ for
information on making menu selections. Note that you will need to perform format/ clear and/ or
make other performance settings before using the DVD option.
Important
This menu can only be accessed if the optional DVD-
RAM drive is installed to the CDR-16T.
The following screen is displayed when
DVD
is chosen in MAIN menu screen. Menu operations
relating to DVD functions are accessed on this screen.
Where
:
①
ASSIGN DVD USE
Sets how your DVD- RAM is used and supplies information on capacity, operation and status.
See sec. ‘9-2-1. Assigning DVD Use’.
②
FORMAT DVD
Accesses a sub menu used to format the DVD-RAM disks before use. See sec.’9-3. Formatting
DVD’.
③
CLEAR EVENT
Accesses a sub menu used to clear events (erase data) from DVD disk without reformatting.
See sec. ‘9-4. Clearing Events’.
④
LOOP REC
Sets whether record operations stop when DVD-RAM disk is full (OFF) or return to timeline start
and overwrite DVD-RAM disk contents (ON)
.
If LOOP REC set to OFF, recording will stop when
the DVD-RAM disk record capacity is reached. Pressing record button again will once more start
record from the beginning of the DVD-RAM disk timeline and currently recorded material on
DVD-RAM disk will be over written.
(Continued following page.)
[DVD]
ASSIGN DVD USE
FORMAT DVD
CLEAR EVENT
LOOP REC-OFF
END ALARM - 0%
DVD ALARM OUT
ERROR - OFF
EVENT - OFF
END - OFF
⑥
SET
EXIT
①
②
③
④
⑤
