page
~
iii
600-DIO - BOARD FEATURES
2-25
600-DIO – BOARD INSTALLATION
2-26
4.4 Installing a 635 DSI Board (Dual Serial Interface) ............................................................................................. 2-27
635-DSI - BOARD FEATURES
2-27
635-DSI - BOARD SPECIFICATIONS
2-28
THE 635-DSI SUPPORTED TECHNOLOGIES
2-28
635-DSI MAX NO. OF DEVICES & DEVICE COUNT (per Section)
2-29
635-DSI Examples of How DSI Sections Function Independently
2-30
635-DSI – BOARD INSTALLATION
2-31
PART 4.4.1 (
OPTIONAL
) PRECONFIGURING THE EOL TERMINATION JUMPERS (635-DSI)
2-31
PART 4.4.2 SETTING THE PASS-THRU VOLTAGE JUMPERS
2-32
PART 4.4.3 (
REQUIRED
) PRE-CONFIGURING THE BOARD ID
2-33
PART 4.2 4 (
REQUIRED
) INSTALLING THE 635 DSI BOARD IN THE CONTROLLER
2-34
4.5 Installing a 635-Model Output Relay Board ..................................................................................................... 2-35
635-OUTPUT RELAY BOARD - FEATURES
2-35
635-RELAY BOARD – INSTALLATION OF BOARD IN CONTROLLER
2-36
PART 4.5.1 PREP STEPS - BEFORE INSTALLING THE RELAY BOARDS
2-36
PART 4.5.2 CONFIGURE THE RELAY BOARD IDs (REQUIRED)
2-38
PART 4.5.3 INSTALLING THE BOARDS IN THE PANELS (REQUIRED)
2-39
4.6 Installing 635-Model Input Module .................................................................................................................. 2-43
635-INPUT MODULE - FEATURES
2-43
635-INPUT MODULE – INSTALLATION OF BOARDS IN CONTROLLER PANELS
2-44
PART 4.6.1 PREP STEPS - BEFORE INSTALLING THE INPUT BOARDS
2-44
PART 4.6.2 CONFIGURE THE BOARD IDs (REQUIRED)
2-46
PART 4.6.3 INSTALLING THE BOARDS IN THE PANELS (REQUIRED)
2-47
STEP 5.
Applying Power to the Controller
2-52
5.1 Pull all field wiring into the controller .............................................................................................................. 2-52
5.2 Connecting Back-up Battery and Power Transformer to the Power Supply ...................................................... 2-52
5.3 About adding an Auxiliary Power Supply inside the Controller ....................................................................... 2-53
5.4 About External Power Supplies outside the Controller .................................................................................... 2-53
5.5 Installing Suppression Diodes at the Door Locks .............................................................................................. 2-53
STEP 6.
Program the 635 CPU Board
2-54
6.1 Connecting to the CPU Board via Putty® or HyperTerminal® ............................................................................ 2-54
6.1 Programming the 635-Model CPU Board via Web Page ................................................................................... 2-55
STEP 7.
Set the Interface Board ID’s (DPI/DIO/DSI)
2-60
7.1 Apply power to the “Daughter” Boards (DPI/DIO/DSI) .................................................................................... 2-60
7.2 Verify Board ID is Correct for Daughter Board(s) (DRM/DIO/DSI) .................................................................... 2-61
7.3 Verify Flash Version is Correct for Daughter Board(s) (DRM/DIO/DSI) ............................................................. 2-61
7.4 Flash Version Chart .......................................................................................................................................... 2-62
STEP 8.
Connect the Controller CPU to the Network
2-63
8.1 Connect the CPU to the Ethernet LAN .............................................................................................................. 2-63
8.2 Verify Connection to the Event Server ............................................................................................................. 2-64
STEP 9.
Test the Controller (recommended)
2-66
9.1 SOFTWARE PROGRAMMING QUICK NOTES: .................................................................................................... 2-66
9.2 TESTING PANELS with WEB PAGE OR SOFTWARE COMMANDS: ...................................................................... 2-66
