600-SERIES HARDWARE MANUAL
Appendix Q - 635 DPI Installation
[STEP 1] FLASH / LOAD THE CPU
NOTE:
If this is a new installation of the entire panel you can perform this step as a part of Step 12.
The 635 DPI requires 4.60 s28 flash (or higher). This ensures the DPI can come online when you are finished
installing.
1.
CPU must be online and connected to the Event Server in order to flash/load the hardware.
2.
Open System Galaxy software and login.
a) From Hardware Tree, right-click on the LOOP icon the controller belongs to; and Select LOAD option
b) Click the EZ-80 Flash tab in the Load window
c) Verify that the expected flash is 4.60 or higher
(you must verify that you are running the correct version
of software / flash s28. – if your site was an upgrade you may need to browse to the flash file)
d) verify that the controller flash matches the software
e) If the two version do not match you must flash the controller
f) Choose VALIDATE & BURN flash when the controller is finished flashing
3.
Once the controller is finished flashing the CPU and all daughter boards, you can switch to the Load Data
tab and load any programming changes to the controller for new or different hardware
APPENDIX-Page
Q-5
