635/600-SERIES HARDWARE INSTALL GUIDE
Chapter-Page
1-22
1.9
Controller Mounting Requirements
1.
The controller enclosure
must
be wall mounted using tear-drop shaped mounting holes.
2.
Panel can be mounted horizontally (typical) or vertically
Non-condensable: do not mount in or near water, liquid, moisture or rain/weather
C
lean,
reasonably dust-free environment.
Temperature should be between -10° C and +60° C.
Location should have limited access for security purposes.
Do not mount to metal studs or brackets.
Do not connect Chassis to Cold Water Ground.
Avoid power transformers and high voltage and high frequency devices.
Figure 5 – 6XX-Series Controller Mounting Requirements:
Applies to both 635- and 600- model controllers. Medium controller shown.