635/600-SERIES HARDWARE INSTALL GUIDE
Chapter-Page
1-6
1.4
Hardware Replacement Parts
The 600-series and 635-series Access Control Panels use the following replacement parts:
1.4.1
ORDERING POWER TRANSFORMER & BATTERIES
+3V Lithium Battery – Panasonic CR2354
•
Galaxy PN 53-2035-00
•
Installs on-board, for the 600-CPU, 635-CPU. Observe polarity when installing.
12V / 8Ah (or equivalent) Sealed, Lead-Acid battery
–
Universal Power Group UB1280
•
Galaxy PN 90-0714-53
•
Installs inside the 600- or 635-series controller cabinet.
•
Replacement every 3-5 years.
•
Do not short-circuit; observing polarity when installing.
•
Avoid total discharging (deep discharging).
•
WARNING: risk of fire, explosion, or burns.
Do not open, disassemble, incinerate or heat above 65°C.
16.5 / 40VA AC Transformer;
Class-2 Plug-in
-
Universal Power Group UB1640RW
•
Galaxy PN 90-0714-52
•
Input rated 120 VAC / 48 VA at 60 Hz
•
Output rated 16.5 VAC / 40VA at 60 Hz
•
Must be plugged into a 110VAC, non-switched outlet. Install at distance less than 25 feet from panel.
•
DO NOT connect controller power adapter to an outlet that is controlled by a switch.
•
Transformer cannot be shared with any other equipment.
1.4.2
ORDERING REPLACEMENT BOARDS
Table 2: REPLACEMENT BOARDS AND PARTS
635 BOARDS
600 BOARDS
OTHER PARTS
635 CPU:
20-0635-30
600 CPU:
20-0600-60
+3V Lithium Battery: 53-2035-00
635 DPI/DRM:
20-0235-10
600 DPI:
20-0268-40
12V / 8Ah
Sealed, Lead-Acid Battery:
90-0714-53
16.5 / 40VA AC Transformer:
90-0714-52
(
Class-2 Plug-in
)