600-SERIES HARDWARE MANUAL
Event Server Overview
3.8
Configuring the TCP/IP Client Server Settings:
The Incoming Connections Port should be set to
‘4003’
and press
APPLY
to save (see
Appendix D for Software Loop properties screen)
Figure 34 -
Event Service Settings > TCP/IP Client Server Settings screen:
Incoming Connections
- The GCS Comm Server makes an incoming connection to the
Event Server. Only the
Communication Server
that is assigned to the Event Service will
connect. The Comm Server is responsible for passing messages between the Event Service
and the Client Gateway Service and the DBWriter Service.
Incoming Comm Server Listen Port
-
The default port is 4003.
This field identifies
the port the Event Service will use to listen for GCS Comm Server connection attempts.
This port must be open and unblocked at the firewall and any port blocking
software.
(SG-9) Incoming Event Server Listen Port
-
The default port is 4005.
This field
identifies the port the Event Service will use to listen for incoming Event Server
connection connections.
This port must be open and unblocked at the firewall and
any port blocking software.
(SG 8.X) Allow Client to Specify option –
when checked this option allows the
upstream
client
service to specify the security protocol if the
server
protocol is different
.
(SG 8.X) Protocol –
this droplist allows user to choose a security protocol.
Chapter-Page
3-7
