Furuno FA-150, Руководство по установке

Страница: 102 / 216

U
lstein Power & Control AS
This document and its content is the property of ULSTEIN. Non-
public information contained herein shall be treated as
Confidential Information. No use, copying, citation or publication
of this document or its content is permitted without prior written
consent from ULSTEIN. Any conflicts arising from unauthorized
use shall be governed by the laws of Norway.
File Name:
BRI-D32004-01II (D)
System Installation
Manual.doc Page:
Page 30 of
56
To enable filters, check the Filter On / Off checkbox (1).
Type the filters you want to use in the text field (2) and click "Add" (3).
To remove a filter that has been set, select it in the list (4) and click "Delete selected" (5).
Figure 17: Filtersconfiguration
3.4.10. Configuration of the magicplex8 GIC Pro, mag GIC Pro
Redundancy
Redundancy enables you to receive data in order of priority which means that the ports of low
priority are sleeping as long as the port of higher priority are receiving (valid) data. A port is
considered receiving no valid data if he receives:
- No data within 2 seconds
or
- Only invalid data within 2 seconds (checksum is examined)
[If you want to set up a different time range, see Chapter "3.7.3 Settings for redundancy" of the
document "Specification of the Configuration"]
Redundancy does not apply to output ports.
Redundancy filters can also be applied: you can define which type of data must be received so
that the port is still considered receiving valid data.
In the following example, the port 4 is used as a backup for the port 0. As soon as the port 0 does
not receive any NMEA sentence containing GGA or GLL for more than 2 seconds, then the port
4 will be activated.