Furuno FA-150, Руководство по установке

Страница: 116 / 216

U
lstein Power & Control AS
This document and its content is the property of ULSTEIN. Non-
public information contained herein shall be treated as
Confidential Information. No use, copying, citation or publication
of this document or its content is permitted without prior written
consent from ULSTEIN. Any conflicts arising from unauthorized
use shall be governed by the laws of Norway.
File Name:
BRI-D32004-01II (D)
System Installation
Manual.doc Page:
Page 44 of
56
II. Restart the SPS after adjusting the address selection switch to apply the IP
configuration changes. To do this, open the cover for the service interface and
press the mode switch down
Figure 8: Restarting the SPS via hardware reset
2.2.2.3
Testing the ETHERNET Link
I. To test the ETHERNET link open the command line interpreter by entering "cmd"
at Start > Execute… under Windows.
Figure 9: "Execute ...." dialog window
II. Enter the command "ping 192.168.1.100."
Figure 10: Command line interpreter with ping command
When the ETHERNET link is error free you will receive the following ping statistics: "Packets:
Sent=4, Received=4, Lost=0 (0% loss)."