Furuno FA-150, Руководство по установке

Страница: 142 / 216

U
lstein Power & Control AS
This document and its content is the property of ULSTEIN. Non-
public information contained herein shall be treated as
Confidential Information. No use, copying, citation or publication
of this document or its content is permitted without prior written
consent from ULSTEIN. Any conflicts arising from unauthorized
use shall be governed by the laws of Norway.
File Name:
BRI-D32004-01II (D)
System Installation
Manual.doc Page:
Page 12 of
56
2.3. USER CONTROLS OVERVIEW
The units are designed by using HATTELAND® Glass Display Control™ (GDC) touch technology to allow
interactivity adjusting brilliance (brightness) and control power on / off with the use of illuminated symbols. Note
that these symbols are only visible (backlight illuminated) when suitable power is connected. There is no physical
moving knobs, potmeters, wheels or push buttons available as everything is touch surface controlled by Projected
Capacitive technology, that allows a human finger (including several types of gloves) to control the unit.
2.3.1.1. Light Sensor
Used to sense level of ambient light in the surrounding environment. The sensor
data can be read by suitable software through the Hatteland Display SCOM
functionality of the unit and thus can be used to control brightness remotely.
Note: This sensor is not visible for the eye or has any illumination behind to
indicate it’s position. Further, by touching or covering this area will naturally
make the sensor data inaccurate.
2.3.1.2. Programmable Alarm LED
Used to indicate an Alarm or similar functionality. The logic to this LED can be
programmed through customized API which gives access to controlling its
function and for instance setup blinking patterns. Note: This LED (when not
activated) is not visible for the eye or has any illumination behind to indicate
it’s position. Further, by touching this area no action will be performed or has
been assigned.
2.3.1.3. Brightness Adjust
Brilliance / Brightness adjustment of the displayed image is adjusted by
touching the (-) or (+) illuminated symbols.
Both symbols are visible as long as the unit is powered.
2.3.1.4. Power ON/OFF
Touching this symbol will either turn on or off the unit.