Furuno FA-150, Руководство по установке

Страница: 99 / 216

U
lstein Power & Control AS
This document and its content is the property of ULSTEIN. Non-
public information contained herein shall be treated as
Confidential Information. No use, copying, citation or publication
of this document or its content is permitted without prior written
consent from ULSTEIN. Any conflicts arising from unauthorized
use shall be governed by the laws of Norway.
File Name:
BRI-D32004-01II (D)
System Installation
Manual.doc Page:
Page 27 of
56
3.4.7. Example setting Port 0
Figure 15: Example setting Port 0
Table 2: Example setting Port 0
1 "Type"
Here you can define what type of port the current port (in that case, Port 0) is. By
clicking on the 'scroll down' button you can chose between:
- Off= port is deactivated.
- Line In =port is fixed as input.
- Line Out = port is fixed as output.
- Line In and Out= port can work both input and output.
- High Speed Line In (50 Hz)= port is fixed as input, with a 50 Hz reading
capability
2 "Alias Name"
At this point it makes sense to enter the product name or the product type of the
box which sends and/or receives data to/from the port. The name can freely be
chosen - but it can be used for a later identification.
3
"Speed"
Here, by clicking on the 'scroll down' button you must define the appropriate baud
rate (in this example 4800).
Please only define the baud rate fixed by the transmitter (here GPS).
NOTE: Please also see the information given under "Filters" and "Buffer Size"!
4
"Parity"
Here you switch between "None" = no parity, "Even"= equal parity, or "Odd" =
odd parity.