Furuno FA-150, Руководство по установке

Страница: 169 / 216

U
lstein Power & Control AS
This document and its content is the property of ULSTEIN. Non-
public information contained herein shall be treated as
Confidential Information. No use, copying, citation or publication
of this document or its content is permitted without prior written
consent from ULSTEIN. Any conflicts arising from unauthorized
use shall be governed by the laws of Norway.
File Name:
BRI-D32004-01II (D)
System Installation
Manual.doc Page:
Page 39 of
56
WAGO PLC
5. WAGO-I/O-SYSTEM 750-880
5.1. Quick start Description
5.1.1. Hardware Design
The fieldbus node is to be installed as follows (viewed from left to right):
Table 1: Hardware Design
Position I/O Module
1 PLC ETHERNET 750-880
2 Digital Input Module 750-400
3 Digital Output Module 750-501
4 End Module 750-600
NOTE:
Hardware must include end module 750-600 and an I/O module!
Please note that your hardware setup must include at least one I/O module and end module 750
600 behind the PLC to ensure the function of the internal data bus.
5.1.1.1. Electric Connection
The 24V DC power supply unit is linked to the 24V and 0V power for the PLC and for the power
jumper contacts (see No. 5 in the figures below “View PLC ETHERNET and its 24 V/0 V
Connection“).
For the application used in the example, it is sufficient to connect a jumper between "24V" and
"+" (see No. 6) or between "0V" and "-" (see No. 9).
5.1.1.2. View PLC ETHERNET 750-880 and its Connection
Figure 1: View PLC ETHERNET 750-880 and its 24 V/0 V Connection