36
REALIGNMENT PROCEDURE (Mirror #2)
15. Adjust Mirror #1.
With mirror #1 aligned, we will now adjust mirror #2. Put a piece of
thermal paper on mirror #3. Using the red dot, adjust the mirror until the red laser is
somewhere on the mirror.
16. Fire and Adjust
. Move the laser head to the far right position. Fire a test dot here
producing a black dot. The red and black dot may be off slightly because the distance
travelled by the laser beams is longer so any small errors are amplified. Without touching
any of the mirrors, adjust the red dot to overlap with the black dot through the screws on the
red laser diode mount or twisting the red laser diode mount.
17. Second Test Fire.
Put on a new piece of thermal paper. Move the laser head to the far left
and fire a black dot. Move the laser head to the far right and fire a second black dot.
18. Track and Verify.
Now you should have two black dots on the thermal paper and the red
dot. Verify as you move from the left side to the right side that the red pointer tracks
between the two black dots.
19. Adjust Mirror #2.
Move the laser head to the far right. The red laser dot should overlap
with one of the black dots. Adjusting only mirror #2, move the red dot between the two
Technical Support is available from 8:00 am (PST) to 5:00 pm (PST) Monday through Friday at
.
