Full Spectrum Laser HL40-5g Hobby Advanced Скачать руководство пользователя

Страница: 78 / 91

5. Tighten Retaining Screws.

Tighten the M3 retaining screws to secure and retain the belt.

Starting the thread with your fingers can speed the process up.

6. Loosen the idler pulley mount.

Once the belt has been installed on the riser, loop over

the drive and idler pulleys.

7. Tension the belt.

Pull on the Y idler pulley mount with your hand. Moderate to strong force

is recommended.

If the motors do not jog, verify that the motors are connected to the

control card.

Detail of X Idler/Tensioner Detail of Y Idler/Tensioner

Technical Support is available from 8:00 am (PST) to 5:00 pm (PST) Monday through Friday at

[email protected]

Содержание HL40-5g Hobby Advanced




























































































Результаты поиска

Содержание HL40-5g Hobby Advanced

Отзывы:

Похожие инструкции для HL40-5g Hobby Advanced

Бренды по названию

Популярные бренды

Full Spectrum Laser HL40-5g Hobby Advanced, Руководство пользователя

Результаты поиска

Содержание HL40-5g Hobby Advanced

Отзывы:

Похожие инструкции для HL40-5g Hobby Advanced

Бренды по названию

Популярные бренды