Full Spectrum Laser HL40-5g Hobby Advanced Скачать руководство пользователя

Страница: 11 / 91

Safety Stickers

1. CERTIFICATION/IDENTIFICATION LABEL.

This sticker is located on the rear of the machine.

Any updates to the information (date of manufacture and manufacturer address) are added as
adhesive overlays.

2. WARNING LABEL.

This label is located on the rear of the machine, above the certification

label.

3. EXPLANATORY LABEL.

This label identifies the classification of the HL405g in accordance

with IEC 608251. It is located on the rear of the machine, next to the Warning Label.

4. NONINTERLOCKED PROTECTIVE HOUSING SAFETY LABELS (5).

Two exterior labels

located on left and bottom panels. Two interior labels located on the bottom of the power supply
and the side optics riser #1 so that the labels are visible when the covers have been removed. One
label located on the right tube access panel.

5. DEFEATABLYINTERLOCKED PROTECTIVE HOUSING SAFETY LABEL.

This label is

located on the machine’s cabinet door, in the lower righthand corner.

6. APERTURE SAFETY LABEL (2).

This label is located on the left slider of the Y gantry and on

the main aperture of the laser tube.

7. ELECTRICAL SAFETY LABEL.

This label is located on the right panel of the machine.

8. FIRE WARNING LABEL.

This fire hazard label is located on the right side of the top panel of

your laser system.

9. FAN WARNING LABEL.

This label warns to keep fingers away from fan and to not tamper with

fan cover.

Technical Support is available from 8:00 am (PST) to 5:00 pm (PST) Monday through Friday at

[email protected]

Содержание HL40-5g Hobby Advanced




























































































Результаты поиска

Содержание HL40-5g Hobby Advanced

Отзывы:

Похожие инструкции для HL40-5g Hobby Advanced

Бренды по названию

Популярные бренды

Full Spectrum Laser HL40-5g Hobby Advanced, Руководство пользователя

Результаты поиска

Содержание HL40-5g Hobby Advanced

Отзывы:

Похожие инструкции для HL40-5g Hobby Advanced

Бренды по названию

Популярные бренды