Full Spectrum Laser HL40-5g Hobby Advanced Скачать руководство пользователя

Страница: 46 / 91

5. Save Profile.

Choose a location on your computer and save your laser’s profile.

6. Log In.

Connect your computer to the internet and log in to your email account you

registered your purchase with (or the email you used to validate your control card).

7. Send Profile to Full Spectrum Laser.

Attach the laser profile file to a new email and send

[email protected]

We will verify that your information matches the

purchase, or send you an email if we need more information. Once your profile has been
verified, we will email you an activated profile. When you receive this email continue to the
final steps below.

8. Download the Activated Profile.

This file will be attached to the email you received.

9. Start RetinaEngrave.

You can drag the activated profile into the workspace, or use the

Help menu → “Open Profile From File”. Your laser is now activated.

Technical Support is available from 8:00 am (PST) to 5:00 pm (PST) Monday through Friday at

[email protected]

Содержание HL40-5g Hobby Advanced




























































































Результаты поиска

Содержание HL40-5g Hobby Advanced

Отзывы:

Похожие инструкции для HL40-5g Hobby Advanced

Бренды по названию

Популярные бренды

Full Spectrum Laser HL40-5g Hobby Advanced, Руководство пользователя

Результаты поиска

Содержание HL40-5g Hobby Advanced

Отзывы:

Похожие инструкции для HL40-5g Hobby Advanced

Бренды по названию

Популярные бренды